Aerogel Formaldehyde Purification Topcoat coating

Product Introduction

Aero atmospheric aerogel formaldehyde cleaning finish is a high-quality interior decoration coating with indoor air purification function, which can effectively purify formaldehyde and other harmful substances produced by interior decoration.The product is a water-based coating prepared by using a special process to disperse the mixed powder of SiO₂ aerogel, nano TiO2, biological enzymes in a special high-performance resin emulsion, with excellent formaldehyde adsorption and photocatalytic purification activity.Because it contains biological materials and special silica-aluminum-titanium compounds, it has a better catalytic decomposition effect on formaldehyde even under no light and low light conditions, and also has high near-infrared reflectivity to prevent thermal diffusion in winter indoor。And provide insulation function, compared with a single formaldehyde removal coating on the market has a very high market competitiveness.

Product Features

Thermal Insulation

Safety and Environmental Protection

Formaldehyde Purification Performance is Excellent

Simple and Convenient Construction

Washable Brush

Product Application

Aero Atmosphere - Room by room - cloudimpression.ae - cloud impression dubai

Room by Room

Aero Atmosphere - ceiling - cloudimpression.ae - cloud impression dubai

Ceiling

Aero Atmosphere - Children's room - cloudimpression.ae - cloud impression dubai

Children's Room

Aero Atmosphere - bedroom - cloudimpression.ae - cloud impression dubai

Bedroom

Construction Description

1

Before painting, the painted wall must be treated to ensure that the wall is dense, no floating ash, no grease, no shell and no peeling.

2

The old wall and powder wall should be cleared of powder layer and old paint film, and washed thoroughly with clean water, until dry before construction.

3

Before use, it should be stirred evenly, and an appropriate amount of water can be added to dilute (to achieve the appropriate construction viscosity), and the dilution ratio is not higher than 20% (weight ratio) to avoid affecting the use performance.

4

The theoretical coating rate is 8 ~ 10㎡/kg/ single pass (the actual coating rate is related to the dilution ratio, the water absorption of the substrate, and the construction method).

5

It is recommended to brush primer + two coats of topcoat. When brushing topcoat, wait for the first coat to dry before applying the second coat.

6

The construction environment temperature shall not be lower than 5℃, and it is not suitable for construction in the high humidity environment of fog/rain.