AG-CCY01 Aerogel Thermal Insulation and Soundproofing Coating for Vehicles

Product Introduction

AG-CCY01 Aerogel Thermal Insulation and Soundproofing Coating for Vehicles is a water-based coating created using a special process that disperses SiO₂ aerogel within a dedicated high-performance resin emulsion. This coating offers outstanding thermal insulation and soundproofing capabilities.

Product Features

Heat Preservation and Insulation

Sound Insulation and Noise Reduction

High Hardness

Strong Adhesion

Elastic

Product Application

Aerogel heat insulation and noise reduction coating for vehicle bodies - cloudimpression.ae - cloud impression dubai

Rail Traffic

Aerogel heat insulation and noise reduction coating for vehicle bodies - cloudimpression.ae - cloud impression dubai

Car Roof, Chassis inside and out

Aerogel heat insulation and noise reduction coating for vehicle bodies - cloudimpression.ae - cloud impression dubai

Special Vehicle

Aerogel heat insulation and noise reduction coating for vehicle bodies - cloudimpression.ae - cloud impression dubai

Other Vehicles

Construction Description

1

During coating construction, the surface of the substrate should be pre-treated to ensure that the surface of the substrate is free of oil, rust and other particles.

2

When spraying, the thickness of each coating does not exceed 1mm, and after the coating is cured and dried, the second coating is performed, and so on, until the designed thickness is reached.

3

Please store at room temperature away from light, do not freeze or expose to sunlight, and pay attention to seal in the container after use to avoid drying and curing.

4

During construction, if the paint has a high viscosity or is slightly cured, it can be diluted with an appropriate amount of water, and the amount of water added cannot exceed 10% of the weight of the paint.

5

Surface drying takes 8 hours, please give enough drying time, pay attention to the protection of the finished product.

6

Paint viscosity is high, do not use excessive dilution, so as not to affect the construction.

7

If strong adhesion is required, it can be coated first with a commercially available primer.

8

Other water-based flexible materials can also be coated on the surface of the coated material if appearance is required.