Product Introduction
AG-D aerogel powder refers to SiO₂ aerogel powder with a nanoporous structure. This product features an extremely high porosity, low density, high specific surface area, ultra-high pore volume, as well as excellent thermal insulation, sound insulation, adsorption, green environmental protection, flame resistance, and water repellency.
Product characteristics
Ultra-low thermal conductivity system
Heat preservation and insulation
Highly hydrophobic
Strong adsorption
Very low density
Green and environmental protection
Q&A
For coating applications, such as 0.1mm thick films and topcoats, when selecting aerogel powder, it is advisable to choose powders with smaller particle sizes to ensure the smoothness of the coating surface and reduce defects. Larger particle size powders are generally used in coatings with a dry film thickness greater than 1mm.
For filling applications, it is preferable to choose powders with lower density, and there are no specific requirements for particle size.
Yes, aerogel powder can be used either alone or in combination for filling. If you encounter any issues during the use of the powder, please contact the company’s technical department.
Aerogel powder is primarily composed of silica and over 90% air. It is chlorine-free, non-toxic, and environmentally safe.
The maximum proportion of aerogel powder in the coating can reach up to 30%. At the same proportion, its performance is significantly superior to other thermal insulation materials.
Precautions
Safety and Protective Measures
During the transportation and application of the material, the generation of dust is inevitable. It is recommended to install exhaust equipment in areas prone to dust production. Construction personnel should wear dust masks, gloves, protective goggles, and other safety equipment to prevent direct contact with the skin and eyes.
Construction and Installation
For industrial applications, it is advisable to refer to the AG-DP construction manual. For more information and support, please contact the technical department's engineering services.
Transport and Storage
When handling and transporting, handle with care and avoid heavy pressure. Keep the packaging sealed and store it in a clean, dry, and well-ventilated indoor area. Do not store it with other volatile chemical materials.